Series 61P - Passive 14 Pin DIP Delay - Surface Mount
page a-ddl-61pPrinter
  • 14 Pin DIP Package Surface Mount
  • Risetime: 20% maximum of total delay
    (see Table) 5-to-1

Series 61P Pinout

Markings & Dimensions

 

Mounting Height
Code Dimension (Max)
A .200 (5.08)
B .250 (6.35)
C .300 (7.62)

 Input Pulse Test Condition

  • Pulse Voltage:       2.5V

  • Pulse Width:           5 x Td

  • Pulse Rise Time:   2nS (10% to 90%)
  • Characteristic Impedance: 50, 100, 200, 300 & 500 Ohms ±10%
  • 10 Equally Spaced Taps
  • Total Delay: 10 to 1000ns
  • Tap Delays: 10% increments standard (other increments available upon request)
  • Temperature Coefficient of Delay: 100ppm/°C max
  • Operating Temperature Range: - 55°C  to +125°C
  • Storage Temperature Range: - 65°C  to +130°C
  • Insulation Resistance: 1000 megohms min @ 50 VDC @ 25°C
  • Dielectric Strength: 50VDC

Series 61P Surface Mount

 


 

Pin Number Sequence (Other pin sequences available upon request)
Code
Tap #		 In 10% 20% 30% 40% 50% 60% 70% 80% 90% Out GND
Std. 14 2 12 3 11 4 5 10 6 9 7 1,8
A 1 2 13 3 12 4 10 5 9 6 7 14
B 2 3 4 5 6 7 9 10 11 12 13 1,14
C 7 9 6 10 5 11 12 3 13 2 14 1,8
D 1 13 2 12 3 11 4 10 5 9 6 7,8,14
E 2 3 4 5 6 7,8 9 10 11 12 13 1,14
F 1 13 2 12 3 11 4 10 5 9 6 7
G 2 13 3 12 4 11 5 10 6 9 7 8,14
H 2 3 4 5 6 7 9 10 11 12 13 1
I 1 13 2 12 3 11 5 10 6 9 7 8,14
J 1 2 13 3 12 4 10 5 9 6 7 8,14
U 2 3 4 5 6 8 9 10 11 12 13 1,7
V 2 3 4 5 6 8 9 10 11 12 13 1
W 1 13 2 12 3 11 4 10 5 9 6 7,14
Part No.

Time Delay (Td)
(nano-
seconds)
± 5% or ± 2ns,
whichever is greater

Time Delay (Td)/Tap
(nano-
seconds)
± 5% or ± 2ns,
whichever is greater,
referenced from input
For 10-tap lines only

Rise Time  (Tr)
(nano-
seconds)
(Max)

Attenuation (%)
Typical
per Impedance (Ω)
50 100 200 300 500
60P-010XXXX 10 1 3 - 5 - - -
60P-020XXXX 20 2 5,5 3 5 5 - -
60P-030XXXX 30 3 6,5 3 5 5 - -
60P-040XXXX 40 4 8 3 5 5 5 -
60P-050XXXX 50 5 10 3 5 5 5 7
60P-060XXXX 60 6 12 3 5 5 5 7
60P-075XXXX 75 7.5 15 3 5 5 5 7
60P-100XXXX 100 10 20 3 5 5 5 7
60P-120XXXX 120 12 24 3 5 6 7 8
60P-150XXXX 150 15 30 3 5 6 7 8
60P-180XXXX 180 18 36 4 5 6 7 8
60P-200XXXX 200 20 40 4 5 6 7 8
60P-220XXXX 220 22 44 4 5 6 7 8
60P-250XXXX 250 25 50 4 5 6 7 8
60P-300XXXX 300 30 60 - 5 8 10 10
60P-375XXXX 375 37.5 75 - 7 8 10 10
60P-500XXXX 500 50 100 - 8 10 12 12
60P-600XXXX 600 60 120 - - - 15 15
60P-750XXXX 750 75 150 - - - 15 20
Allen Avionics, Inc.
255 East Second Street, Mineola, NY  11501
Phone: (516) 248-8080
Fax: (516) 747-6724
E-Mail: Info@AllenAvionics.com

We are pleased to accept

It's your choice