Home Up Glossary of Terms Table of Contents Get A CD Catalog What's New Contact Us Literature Request
Spiradel Delay Lines - Series ST - Tapped

150 and 325 Ohm Impedance
50, 75 and 100 Ohm Impedance
page gpdl-st150
  • Highest Time Delay to Rise Time Ratio

  • Exceptional Phase Linearity

    • Available in 50, 75, 100, 150 and 325 Ohms
    • Delays from 20 to 1500 nanoseconds
    • Total Delay Tolerance is ±5%
      Tighter Tolerances Available

                printer friendly download

Units are tapped at increments of 10% of their total delay. Other tapped increments are available.

Delay tolerance at all taps is 10% or 2 nanoseconds (whichever is greater).
Series ST Dimensional Print Series ST STiradel Tapped

Oscilloscope Presentation

"D" "R"
1.6" 0.600"
2.0" 0.800"
2.5" 1.050"
3.25" 1.425"
3.75" 1.675"
Standard Height
of all units: 7/16"

 
Part No. Time Delay
(Nanoseconds)		 Rise Time
(Nanoseconds)
Maximum		 Delay to
Rise Time
Ratio
Minimum		 Bandwidth
Minimum
(MHz)		 Attenuation
Max. (%)		 Diameter
(inches)

Impedance 150 Ohms
ST0020Z150 20 6.0 3.3/1 58.3 5 1.60
ST0030Z150 30 8.0 3.8/1 43.7 5 1.60
ST0040Z150 40 9.0 4.4/1 38.8 5 1.60
ST0050Z150 50 9.5 5.3/1 36.8 5 1.60
ST0060Z150 60 10.0 6.0/1 35.0 10 1.60
ST0070Z150 70 10.5 6.6/1 33.3 10 1.60
ST0080Z150 80 11.0 7.3/1 31.8 10 1.60
ST0090Z150 90 11.5 7.8/1 30.4 10 1.60
ST0100Z150 100 12.0 8.3/1 29.1 10 1.60
ST0150Z150 150 15.0 10.0/1 23.3 10 2.00
ST0200Z050 200 17.0 11.8/1 20.5 15 2.00
ST0250Z150 250 19.0 13.2/1 18.4 15 2.50
ST0300Z150 300 21.0 14.3/1 16.6 15 2.50
ST0350Z150 350 23.0 15.2/1 15.2 15 2.50
ST0400Z150 400 25.0 16.0/1 14.0 20 2.50
ST0450Z150 450 27.0 16.7/1 12.9 20 3.25
ST0500Z050 500 29.0 17.2/1 12.0 25 3.25
ST0550Z150 550 31.0 17.7/1 11.2 25 3.25
ST0600Z150 600 33.0 18.2/1 10.6 25 3.25
ST0650Z150 650 35.0 18.6/1 10.0 25 3.25
ST0700Z150 700 37.5 18.7/1 9.4 25 3.25
ST0750Z150 750 40.0 18.8/1 8.7 30 3.75
ST0800Z050 800 41.9 19.0/1 8.3 30 3.75
ST0850Z150 850 44.0 19.3/1 7.9 30 3.75
ST0900Z150 900 46.0 19.6/1 7.6 30 3.75
ST0950Z150 950 48.0 19.8/1 7.2 35 3.75
ST1000Z150 1000 50.0 20.0/1 7.0 35 3.75

Impedance 325 Ohms
ST0100Z325 100 16.0 6.25/1 21.8 15 1.60
ST0150Z325 150 20.0 7.5/1 17.5 15 1.60
ST0200Z325 200 24.0 8.33/1 14.5 15 1.60
ST0250Z325 250 25.0 10.0/1 14.0 20 2.00
ST0300Z325 300 26.0 11.5/1 13.4 20 2.00
ST0350Z325 350 28.0 12.5/1 12.5 20 2.00
ST0400Z325 400 31.0 12.9/1 11.2 30 2.00
ST0450Z325 450 33.0 13.6/1 10.6 30 2.50
ST0500Z325 500 35.0 14.3/1 10.0 30 2.50
ST0550Z325 550 36.0 15.3/1 9.7 30 2.50
ST0600Z325 600 37.0 16.2/1 9.4 30 2.50
ST0650Z325 650 39.0 16.6/1 8.9 30 3.25
ST0700Z325 700 41.0 17.0/1 8.5 35 3.25
ST0750Z325 750 43.0 17.4/1 8.1 35 3.25
ST0800Z325 800 44.0 18.2/1 7.9 35 3.25
ST0850Z325 850 46.0 18.5/1 7.6 35 3.25
ST0900Z325 900 48.0 18.8/1 7.2 35 3.25
ST0950Z325 950 50.0 19.0/1 7.0 35 3.25
ST1000Z325 1000 52.0 19.2/1 6.7 35 3.25
ST0100Z325 1100 56.0 19.6/1 6.2 45 3.75
ST0100Z325 1200 59.0 20.3/1 5.9 45 3.75
ST0100Z325 1300 62.0 21.0/1 5.6 50 3.75
ST0100Z325 1400 66.0 21.2/1 5.3 50 3.75
ST0100Z325 1500 69.0 21.7/1 5.0 55 3.75

Information Request Form

Select the items that apply, and then submit this form.
You must specify your FAX number or we cannot reply.

Send ST150 product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone
FAX

&nbST;

 

Allen Avionics Home | Products | Video Hum and Noise Eliminators | Analog & Digital Delay Lines | Offset Marking Machine | Video Delay Lines | Video Filters | Brickwall Low Pass Filters | Filter Facts | Mechanical | General Purpose Delay Lines | Sales, Prices & Representatives | Glossary | About Hum | NTSC Video | Audio Ground Loop Isolation Transformers | Copyright | Feedback Page | What's New | Search | Site Map

 

Allen Avionics, Inc.
255 East Second Street, Mineola, NY  11501
Phone: (516) 248-8080
Fax: (516) 747-6724
E-Mail: Info@AllenAvionics.com

We are pleased to accept

It's your choice