Tubular LC Highpass

thp

Printer Friendly Page (click here)

Reduced Size over Conventional Tubular Filters
Low Insertion Loss - 0.2 dB per Section
1 dB Maximum Ripple
BNC Connectors Standard, SMA Connectors Available
Order Any Cut-off Frequency from 0.5 MHz to 1000 MHz
Passive LC Filter Design
Good Temperature Stability: -55° to +85° C
50 Ohms (75 and 100 Ohm Impedance available to 50 MHz)
1 Watt Power Handling Capacity

Tubular L-C Highpass Filters - Series THP

Ordering Procedure - Examples

Filter Type (THP)

Cut-Off Frequency

Number of Sections
(See Graph)

Impedance (Ohms)

B
(for BNC Connectors)

S
(for SMA Connectors)

Examples below

THP500P2050B

500P = 500 MHz

050 = 50 Ohms

THP50P03075S

50P0 = 50.0 MHz

075 = 75 Ohms

THP5P554100B

5P55 = 5.55 MHz

100 = 100 Ohms

Cut-off Frequency can be any 4 characters from .5MHz (00P5) to 1000 MHz (1000)
"P" represents the decimal point and, if used, is valid only in the 2, 3, and 4th position

Examples: 5P55 = 5.55 MHz, 58P7 = 58.7 MHz, 500P = 500MHz, 1000 = 1000 MHz

Mechanical Specifications (click here)

Number of Sections (See Graph)	20 dB	40dB	Size
2	.625	.435	TA
3	.800	.625	TA
4	.870	.714	TB
5	.877	.769	TB
6	.909	.833	TC

B = .45 for BNC B = .35 for SMA D = .50
All filters are supplied in .500 diameter sealed metal tubes with BNC connectors or SMA connectors
(L) Size (Inches)
TA	2.00
TB	2.50
TC	3.00

Allen Avionics, Inc.
255 East Second Street, Mineola, NY 11501
Phone: (516) 248-8080
Fax: (516) 747-6724
E-Mail: Info@AllenAvionics.com
© Allen Avionics 2000-2013

We are pleased to accept

It's your choice